Equipment Rental

APT Model 190 1350 Blows per Min 6 1/8” Stroke 2 5/8” Bore 1 1/8 x 6” Chuck 3/4” Air Inlet 75-80 CFM 91 LBS Contact: For questions or concerns, p...

APT Model 650 2100 Blows per Min 3 3/4” Stroke 1 1/8” Bore .680 Round ½” Air Inlet 30 CFM 18.5 LBS Contact: For questions or concerns, please fee...

Contact: For questions or concerns, please feel free to contact us online, or call us directly here at (248) 348-8864. Hours of Operation: Monday-F...

Bit sizes available are 6", 8”, 10”, 12”, 18”, 24” Contact: For questions or concerns, please feel free to contact us online, or call us directly ...

Oztech BP50A 2.5 HP Honda Engine 4 Stroke 24 LBS 10,000-12,000 VPM Range 1 /2”-2” Head Up to 21’ of Shaft Available Contact: For questions or con...

Bosch 1773AK 5” Capacity 110 Volt 10 Amp 5/8-11” Spindle Thread 7/8” Arbor Size 6 LBS Guard has built in Vacuum Port Contact: For questions or co...

Contact: For questions or concerns, please feel free to contact us online, or call us directly here at (248) 348-8864. Hours of Operation: Monday-F...

Contact: For questions or concerns, please feel free to contact us online, or call us directly here at (248) 348-8864. Hours of Operation: Monday-F...

Oztech 2.4 110 Volt 17 Amps 2 ¼ HP 1 ½” or 2” Head Up to 21’ of Shaft Available Contact: For questions or concerns, please feel free to contact u...

Dewalt® D25980K 110 Volt 15 Amp 1600 Watt 1 1/8” Tool Chuck 61 ft lbs Impact Energy 68 LBS Includes wheel cart and 100’ Extension Cord Contact: F...

EDCO CPM-8 5 HP Electric Motor 230 Volt 19.5 Amps 2130 RPMS 220 LBs 20 Amp, 3 Prong Plug 45’, 75’ or 100’ Power Cords Avail. Requires 13KW-15KW Ge...

EDCO CPM-8 9 HP Honda Engine 2150 RPMS 190 LBs 8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″ Remo...

EDCO TMC-7 Honda 5.5 HP Engine 7” Working Width 400-500 Lineal ft. per hour at 1/16” approximately Standard Vacuum Port 3150 RPM 120 LBS Ideal f...

EDCO Vortex  200 DRY ONLY CONTRx Vacuum Systems control air-borne dust particles and shorten cleanups while reducing worker’s exposure to dust and ...

Gar-Bro 4126L 4 cu. Yard Capacity 39” Loading Height 82” Overall Width 10’ 6” Overall Suspended Height 2900 LBS L-Series Lightweight Laydown Buck...

General EP12ACP 1 HP Electric Motor 115 Volt 60 HZ 12” Diameter Includes 25’ Duct 1825 ACFM Free Air 1368 ACFM One 90 degree Bend 1290 ACFM Two 90...

Genie GS-2032 26’ Working Height 20’ Platform Height 32” Wide 96” Long 800 LBS Max Payload 92” Turning Radius 4” Ground Clearance 30% Gradeability...

Crown HK150 Thaw up to 2,800 sq ft Cure up to 5,600 sq ft Temporary Heat up to 6,200 sq ft 2 – 700 ft Field Hoses Computer Controlled System Digit...

Crown HK300 Thaw up to 5,600 sq ft Cure up to 11,200 sq ft Temporary Heat up to 12,000 sq ft 4 – 700 ft Field Hoses Computer Controlled System Dig...

Heat Wagon HS600KT 600,000 Btu Direct Fired Oil Heater Runs on #1, #2 Diesel, JP-8, or Jet A Fuel Choice of Operation with or without Optional The...

Honda EB3000 3000 Max Watts 2600 Rated Watts 120 Volt Honda 6.5 HP Engine Recoil Start 2.7 Gal Fuel Tank 6 Hour Run time on Full Load 9.5 Hour Run...

Honda EB6500 6500 Watt Max 5500 Watt Rated 120/240 Volt 13 HP Honda Engine Recoil Start 220 LBS 6.2 Gal Fuel Tank Auto Throttle 6.9 HR Run time on...

Multiquip GA-9.7HZ 9700 Watt Max 8400 Watt Continuous 120/240 Volt Honda 18 HP Engine Recoil/Electric Start 10 Gal Fuel Tank 6.75 Hour Run time on...

Husqvarna K3000 Wet 120 Volt 15 Amp 1,800 Watts Rated Output 5” Depth of Cut without Vacuum Attachment 4 ½” Depth of Cut with Vacuum Attachment 5,...